- 可输入一个产品的OE编码或者参考编码
- 如：本田雅阁减振器，标致307刹车片 (支持拼音)
- 例如：可输入厂商电话、联系人、地址、公司名等
- Home
- Third-party data
- RICHMOND
- CR825456
Third-party dataRICHMOND : CR825456
Differential Ring and Pinion
RICHMOND : CR825456
Model
CHRYSLER
ASPEN
4.7L V8
 2008 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.7L V8
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.7L V8 ELECTRIC/GAS
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
MITSUBISHI
RAIDER
3.7L V6
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2008 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
JEEP
COMPASS
2.0L L4
| 2010 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
LIBERTY
2.4L L4
| 2002 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2005 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
2.8L L4 DIESEL Turbocharged
| 2006 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
3.7L V6
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2004 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2005 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2006 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2010 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2013 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
GRAND CHEROKEE
3.0L V6 DIESEL Turbocharged
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
3.7L V6
| 2006 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2010 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
4.7L V8
| 2006 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.7L V8
| 2006 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2010 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
6.1L V8
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2010 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
COMMANDER
3.7L V6
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2010 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
4.7L V8
| 2006 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.7L V8
| 2006 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2010 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
DODGE
DAKOTA
2.5L L4
| 2002 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
3.7L V6
| 2004 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2010 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
3.9L V6
| 2002 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
4.7L V8
| 2002 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2004 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2008 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2010 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.9L V8
| 2002 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
DURANGO
3.7L V6
| 2005 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
4.7L V8
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2008 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.7L V8
| 2006 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.7L V8 ELECTRIC/GAS
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.9L V8
| 2002 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
NITRO
3.7L V6
| 2007 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2010 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
4.0L V6
| 2009 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2010 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
RAM 1500 PICKUP
3.7L V6
| 2002 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2004 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
4.7L V8
| 2002 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2004 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.7L V8
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2004 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.9L V8
| 2002 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
8.3L V10
| 2004 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
RAM 1500 VAN
3.9L V6
| 2002 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.2L V8
| 2002 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.9L V8
| 2002 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
RAM 2500 VAN
5.2L V8
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
5.9L V8
| 2003 |
EXCel Rear; For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance |
Copyright © 2008-2017 YiParts Guangdong ICP No.08123151 Value-added telecommunications business license: Guangdong B2-20080289
Prohibit unauthorized reproduced excerpts, copy or create mirror and if violated, will be held liable
YiParts of auto parts product pictures are from the auto parts manufacturers to provide, for reference only, if violated your copyright, please contact us.
